Small Radius Omni-Flex®

1.0:1 Turn Ratio. Small Radius Omni-Flex® conveyor belts can negotiate a much tighter turn than regular Omni-Flex belts. 

In general, the inside radius can be equal to the belt width, making Small Radius Omni-Flex ideal for use in applications where floor space is limited. Small Radius Omni-Flex can turn either left or right (only), pivoting about a center link.

STAINLESS STEEL, HEAVY DUTY CONSTRUCTION

All Omni-Flex components are precision crafted from premium quality stainless steel to exacting standards. The finish is smooth and burr-free for easy clean-up and excellent sanitary and hygienic properties. Small Radius Omni-Flex is constructed with two flat wire product carrying surfaces divided by two rows of reinforcing bar links assembled at the center of the belt to carry tension.

BROAD RANGE OF OPTIONS AND ACCESSORIES
The flat wire mesh of Small Radius Omni-Flex is available in two popular mesh configurations. A double row of bar links may be added to the inside edge of the belt. Fatigue resistant pickets are available on all Small Radius Omni-Flex belts and increase belt service life by about 30%. Other accessories such as guard edge plates, lane dividers and custom attachments are available for special needs.Product ApplicationsSpiral Freezer BeltSpiral Cooler BeltSpiral Proofer BeltSpiral Cooker Belt

Product Applications

  • Spiral Freezer Belt

  • Spiral Cooler Belt

  • Spiral Proofer Belt

  • Spiral Cooker Belt

Small Radius Omni-Flex G1 & G3

small-radius-omni-flex-g1-g3.gif
small-radius-omni-flex-g1-g3-specs.gif

Available Options:

standard-bar-links.gif

Bar Links on Inside Edge

One double row of bar links at the center of the belt is standard on all Omni-Flex® belts in order to carry belt tension. A double row of bar links configured at the inside edge of the belt is optional.

omni-flex-pickets_0.gif

Fatigue Resistant Pickets (Patented)

These special pickets, which are manufactured with an outward facing radius centered on the trailing face of the picket, are designed to extend the service life of the belt by approximately 30%. This radius serves to lengthen the belt pitch in selected openings near the outside edge of the belt. This causes the bar links to bear the full load of the belt in a turn, relieving stress on the picket, which increases the belt’s service life.

omni-flex-guard-edge_2.gif

Guard Edges

Plates assembled onto belt edges to prevent product from falling off. Guard edges serve to replace bar links on a one-to-one basis. Available heights (above the conveying surface) are: 0.50" (12.7 mm), 0.75" (19.1 mm), 1" (25.4 mm), 1.5" (38.1 mm), and 2" (50.8 mm).

omni-flex-lane-dividers_1.gif

Lane Dividers

Plates assembled onto belt edges to prevent product from falling off. Guard edges serve to replace bar links on a one-to-one basis. Available heights (above the conveying surface) are: 0.50" (12.7 mm), 0.75" (19.1 mm), 1" (25.4 mm), 1.5" (38.1 mm), and 2" (50.8 mm).